대한민국학술원


학술원회원

  • 회원명단
    • 전체회원현황
    • 작고하신 회원
    • 명예회원
  • 회원선출규정
  • 회원자격
  • 회원선출절차

  • 확대
  • 축소
  • 인쇄하기

전체회원현황

Home학술원회원회원명단전체회원현황

회원정보

이장무 회원님의 상세정보입니다.

전체인쇄하기 인쇄하기

  • 기본사항
  • 학력사항
  • 경력사항
  • 상훈사항
  • 연구업적
  • 주요저서
  • 주요연구논문
  • 주요국내외활동
연구논문
논문명 발표학술지명 Vol No PP 발행연도
염영하, 이장무, 곽재경, 종체를 이상화한 원통체의 고유진동과 응력해석에 관한 연구 한국범종연구회지 [범종] No. 3 19-30 1980
K. H. Han, and J. M. Lee, Dynamic Analysis and Optimization of a Machine Tool Structure Transactions of the Korean Society of Mechanical Engineers Vol. 6, No. 4 384-389 1982
C. K. Park and J. M. Lee, A Study on the Improvement of the Digging Load Capacity of an Excavator by CAD Technique Journal of Korea Society of Automotive Engineers Vol. 4, No. 2 24-34 1982
Y. H. Yum, J. M. Lee, J. O. Kim and Y. S. Kim, A Study for Improving the Dynamic Characteristics of Machine Tool Structure Journal of the Korean Society for Aeronautical and Space Science Vol. 11, No. 1 55-62 1983
Y. H. Yum, J. M. Lee and W. H. Lee, Study on the Computer Aided Design of Lathe Feed Driving Unit Journal of Korea Society of Automotive Engineers Vol. 5, No. 1 63-78 1983
Y. J. Huh, B. K. Kim and J. M. Lee, A Study on Dynamic Characteristics of Rotor with Flywheel Transactions of the Korean Society of Mechanical Engineers Vol 7, No. 2 186-192 1983
H. J. Yim, J. M. Lee and S. W. Cho, A Study on the Synthesis of Robot Arms Based on a Graphical Analysis of Accessible Region Transactions of the Korean Society of Mechanical Engineers Vol. 8, No. 3 250-256 1984
B. G. Chung, S. H. Kim, Y. K. Kwak, and J. M. Lee, A Study on the Vibration Isolation of Engine for the Passenger Vehicle Transactions of the Korean Society of Mechanical Engineers Vol. 8, No. 4 335-342 1984
최순, 윤종호, 이장무, 선반주축구동부의 최적설계에 관한 연구 서울대학교 공대연구보고 제16권, 제2호 1984. 10.
염영하, 이장무, 이영배, 나형용, 강춘식, 성굉모, 강찬균, 보신각 새종의 설계 및 제작 한국범종연구회지, [범종] No. 8 93-148 1985
정순배, 윤종호, 이장무, 유한요소법을 이용한 축대칭 원통형 쉘의 진동 특성 연구 한국범종연구회지 「범종」 No. 8 19-30 1985
J. M. Lee, A Study on the Dynamic Performance Tests of Machine Tools (I) Transactions of the Korean Society of Mechanical Engineers Vol. 9, No. 2 190-201 1985
S. H. Oh and J. M. Lee, Stress Analysis of a Diesel Engine Connecting Rod Transactions of the Korean Society of Mechanical Engineers Vol. 9, No. 4 471-477 1985
S. W. Cho, J. M. Lee, K. I. Lee and J. T. Chung, A Study on the Computer Aided Design and Process Planning Transactions of the Korean Society of Mechanical Engineers Vol. 9, No. 5 647-654 1985
J. M. Lee, I. Ham, A Study on the Design Improvement of Lathes Based on a Chatter Analysis and a Component Mode Synthesis Annals of the CIRP Vol. 35, No. 1 263-266 1986
J. M. Lee, Y. H. Yum, M. H. Sung, and S. H. Sin, A Study on the Safety and Human Engineering for the Design Quality-improvement of Vehicle Seats Journal of the Korean Society of Automotive Engineers Vol. 8, No. 3 1986
S. H. Kim, J. H. Kim, J. M. Lee and S. W. Cho, A Study on the Acoustical and Vibrational Characteristics of a Passenger Car (I) Transactions of the Korean Society of Mechanical Engineers Vol. 10, No. 4 529-534 1986
Jae-Eung Oh, Yu-Yub Lee, Sung-Ha. Yum, and Jang-Moo Lee, The Estimation of Mode Parameter due to the Change of Sweet Spot by the Structural Modification of Tennis Racket Transactions of Japan Society for Mechanical Engineers 53 (488c) 940-945 1987
J. S. Hong, S. H. Kim, and J. M. Lee, Free Vibration Analysis of a Circular Ring with a Concentrated Mass Transactions of the Korean Society of Mechanical Engineers Vol. 11, No. 1 170-176 1987
C. H. Pak, J. M. Lee, and Y. P. Park, Nonlinear Vibration Analysis using Variational Principle Transactions of the Korean Society of Mechanical Engineers Vol. 11, No. 3 519-527 1987
J. M. Lee, A Study on the Dynamic Modelling of Structures with Bolted and Bearing Joints Annals of the CIRP Vol. 37, No. 1 343-346 1988
Jang Moo Lee, Kyo Il Lee, Yeong Il Park, Young Duk Kim, Chull Gi Song, Hee Seok Kang,A Study on the Dynamic Characteristics of Hydraulic Power Transmissions Transactions of the Korean Society of Mechanical Engineers Vol. 12, No. 4 682-693 1988
Kyo Il Lee, Jin Whan Lee, and Jang Moo Lee, Pattern Recognition and Process Planning Prismatic Workpieces by Knowledge Based Approach Annals of the CIRP Vol. 38, No. 1 485-488 1989
J. M. Lee, S. H. Cheon, S. H. Kim and Y. H. Yum, A Study on the Vibrational Characteristics of Korean Bells (I) Transactions of Korean Society of Mechanical Engineers Vol. 13, No. 3 397-403 1989. 5
Jong-Seong Gim, Dong Woo Cho and Jang Moo Lee, Optimal Design of Face Milling Cutter Geometry Annals of the CIRP Vol. 39, No. 1 391-394 1990
홍진선, 이장무, 축대칭 셸의 음향방사 해석에 관한 연구 대한기계학회논문집, 제14권, 제4호 797-802 1990
S. Y. Lee and J. M. Lee, Dynamic Analysis of Structures with Nonlinear Joints by Using Substructure Synthesis Method Transactions of Korean Society for Mechanical Engineers Vol. 14, No. 2 324-330 1990
S. H. Kim, J. M. Lee and J. H. Kim, A Study on the Acoustical and Vibrational Characteristics of a Passenger Car (Ⅱ) Transactions of the Korean Society of Mechanical Engineers Vol. 15, No. 3 824-833 1991
Tae Jo Ko, Dong Woo Cho and Jang Moo Lee, Fuzzy Pattern Recognition for Tool Wear Monitoring in Diamond Turning Annals of the CIRP Vol. 41, No. 1 125-128 1992
C. N. Chu, J. M. Lee and R. L. Kashyap, Skeleton-Based Design Analysis of Near Net-Shape Products Annals of the CIRP Vol. 42, No. 1 193-196 1993
박동철, 이장무, 염영하, 상원사종 및 성덕대왕신종의 음통과 명동에 대한 고찰 한국범종연구회지, 범종 No. 14, No. 15 합본 1-15 1993
Jang M. Lee, Deok K. Choi, Won T. Kwon, Chong N. Chu and Dong S. Park, In-process Tool Breakage Detection Using a Built-in Force Sensor and an AE sensor Transactions of the North American Manufacturing Research Institute of SME Vol.22 1994
Jang M. Lee, Deok K. Choi, Won T. Kwon, Chong N. Chu and Dong S. Park, In-process Tool Breakage Detection Using a Built-in Force Sensor and an AE Sensor Transactions of the North American Manufacturing Research Institute of SME Vol. 22 91-97 1994
Jang Moo Lee, D K. Choi and C. N. Chu, Real-Time Tool Breakage Monitoring for NC Turning and Drilling Annals of the CIRP Vol. 43, No. 1 81-84 1994
염영하, 이장무, 김석현, 이성진, EXPO 대종의 진동과 음향에 관한 연구 한국범종연구회지, 범종 No.16 1994
염영하, 이장무, 김석현, 한국종의 맥놀이 교정에 관한 연구 한국범종연구회지, 범종 No. 16 1994
S. K. Kim, S. J. Lee and J. M. Lee, Dynamic Analysis of Spindle System with magnetic Coupling(1) Journal of the Korean society of Precision Engineering Vol. 11, No. 4 1994
Kim Gi Dae, Kwon Won Tae, Chu Chong Nam and Lee Jang Moo, In- Process Chatter Detection Using Multiple Sensors in Turning Transactions of the Korean Society of Mechanical Engineers Vol. 18, No. 7 1994
이장무, 이영배, 강연준, 이성진, 고대 중국 편종의 음향 한국범종연구회지, 범종 No.17 1995
이영배, 염영하, 나형용, 이장무, 최만린, 곽동해, 박한종, 통일의 종에 관한 연구 한국범종연구회지, 범종 No. 17 1995
Jang Moo Lee, Jin Sun Hong, Vibraion of a Circular Plate with a Concentrated Mass Attached on a Radius Journal of Theoretical and Applied Mechanics Vol.1, No.1 1995
J. H. Yoo, J. H. Yoon, S. K. Kim, J. M. Lee, Automatic Diagnosis of Defects in Roller Element Bearings Journal of the Korean Society for Noise and Vibration Engineering Vol.5, No.3 1995
S. G. Kim, S. Y. Lee, J. M. Lee, Dynamic Analysis on Belt-Drive System of Machine Tools Journal of the Korean Society Precision Engineering Vol.12, No.1 1995
D. K. Choi, C. N. Chu, J. M. Lee, A study on Real time Monitoring of Tool Fracture in Tuning Journal of the Korean Society Precision Engineering Vol.12, No.3 1995
송성재. 이장무, 로봇 운동방정식과 감도해석 한국정밀공학회지 제12권, 제6회 1995
S.G. Kim, J. M, Lee, Dynamic Analysis of Spindle System with Magnetic Coupling(II) Journal of the Korean Society Precision Engineering Vol.12, No.7 1995
이장무, 허일규, 권원태, 주종남, 밀링공정에서 이송축 모터 전류를 이용한 공구파괴 감시 한국정밀공학회지 제12권, 제13호 1995
Y. H. Choi, J. H. Lee. J. M. Lee, Computer Simulations of 4-Wheeled Vehicle Manoeuvres using a 3-Dimensional Double-Track Vehicle Model Transaction of Korea Society of Automotive Engineers Vol.3, No.3 1995
J.S Kang, J.R Yun, H.K. Min, J. M. Lee, Analysis of Dynamics Characteristics of a Vehicle Undergoing Tuning and Braking Transactions of Korea Society of Automotive Engineers Vol.3, No.3 1995
C.I. Park, and J. M. Lee, Analysis of Load Transmission Characteristics for Automobile Helical Gear Transactions of Korea Society of Automotive Engineers Vol.3, No.5 1995
W.S. Lim. D.J Lee, J. M. Lee, Y. I. Park, Analysis on the Qualitative performance of a Power Split/Circulation Transmission Transactions of Korea Society of Automotive Engineers Vol.3, No.6 1995
Weon Sig Lim, Yeong Il Park, Jang Moo Lee, Analysis of Shifting Transients with Emphasis on the Modeling of a Torque Converter Transactions of the Korean Society of Mechanical Engineers Vol. 19, No.1 1995
J.H. Yoon, S.K. Kim, J.H. Kim, J.H. Yoo, J.M. Lee, A study on the Automatic Diagnosis System of Ball Bearings for Rotating Machinery Transaction of the Korean Society of Mechanical Engineers Vol.19, No.8 1995
J.H Yoon and J.M Lee, Detection of Localized Defects in Ball Bearing Using Phase Spectrum Journal of the Korea Society of Precision Engineering Vol.13, No.3 1996
Jong Ouk Youn and Jang Moo Lee, Double Fourier Sine Series Method for The Free Vibration of Rectangular Plate Journal of Korean Society for Noise and Vibration Engineering Vol6, No.6 1996
H.S. Jo, W.S. Lim, J.M Lee, J.Y. Kim, Dynamic Performance Estimation and Optimization for the Power Transmission of a Heavy Duty Vehicle Transactions of Korea Society of Automotive Engineers Vol.4, No.1 1996
J.O. Youn, J.H. Kim, J.M Lee and J.G Lee, Analysis of Flexure Stiffness and Stiffness Test in DTG Journal of the Korea Society of Precision Engineering Vol.13, No.5 1996
Sung-Jae Song, Byung-Kwan Cho and Jang Moo Lee, Symbolic Generation of Dynamic Equations and Modeling of a Parallel Robot Transactions of the Korean Society of Mechanical Engineers(A) Vol.20, No.1 1996
J.M. Lee, J.R. Yun, J.S. Kang, J.H. Jeong, T.O. Tak, A study on the Effects of Suspension Design Parameters on Cornering Performances of a Vehicle Transactions of Korea Society Automotive Engineers Vol.4, No.4 1996
Chan Il Park and Jang Moo Lee, A Study on the Vibration Characteristics of Helical Gears with Tooth Errors Transactions of the Korean Society of Mechanical Engineers(A) Vol.20, No.5 1996
S.G. Kim, S.Y. Lee and J.M Lee, Analysis on the Nonlinear Vibration Characteristics of a Belt Driven System Transactions of the Korean Society of Mechanical Engineers(A) Vol.20, No.4 1996
Ju Seok Kang, Jung Rak Yun, Jang Moo Lee and Tae Oh Tak, Elastokiematic Analysis and Optimization of Suspension Compliance Characteristics Journal of Passenger Cars, Transactions of Society of Automotive Engineers Vp;. 106 1997
Ju Seok Kang, Jung Rak Yun, Jang Moo Lee and Tae Oh Tak, Elastokinematic Analysis and Optimization of Suspension Compliance Characteristics Journal of Passenger Cars, Transactions of Society of Automotive Engineers Vol. 106 161-167 1997
C. N. Chu, S. Y. Kim, J. M. Lee and B. H. Kim, Feed-Rate Optimization of Ball End Milling Considering Local Shape Features Annals of the CIRP Vol. 46, No. 1 433-436 1997
S. Y. Lee, J. S. Kang, J. R. Yun, J. M. Lee, K.Y. Yun and N. K. Kim, Vibration Analysis of a Pulsator Type Washing System Journal of the Korean Society for Noise and Vibration Engineering Vol.7, No.2 1997
S.Y.Lee , S.G. Kim and J.M Lee, Analysis of Structural Dynamic Characteristics and End Milling in a Vertical Machining Center Journal of the Korea Society of Precision Engineering Vol.14, No.3 1997
Jong Ouk Youn, Chang Gi Ahn and Jang Moo Lee, Error Analysis of Mechanical Parts and Dynamic Balancing in a Dynamically Tuned Gyroscope Journal of the Korea Society Precision Engineering Vol.14, NO.2 1997
Y.H.Kim, C.I.Park and J.M. Lee, Analysis of the Dynamic Characteristics of A Passenger Car Automatic Transmission Transactions of Korea Society of Automotive Engineers Vol5, No.3 1997
H. K. Kim T.O. Tak, J.M Lee, Kinematic Design Sensitivity Analysis of Suspension Systems Using Direct Differentiation Transactions of Korea Society of Automotive Engineers Vol.5, No.1 1997
Woo Jin Jang, Weon Sig Lim and Jang Moo Lee, A Study on the Basic Design of a Torque Converter Using Equivalent Performance Model Transaction of the Korean Socety of Mechanical Engineer(A) Vol.21, No.3 1997
W.S. Lim, Y.I. Park, J.M Lee, An Algorithm for Self-determining Degrees-of-freedom of Shifting Systems Transactions of Korea Society of Automotive Engineers Vol.5, No.6 1997
J.M Lee, J.R Yun, J.S, Kang, S.W Bae and T.O. Tak, A Study on the Stedy-State Conerning of a Vehicle Considering Roll Motion Transactions of Korea Society of Automotive Engineers Vol.5, No.6 1997
S.W. Baem J.S Kang, J.R Yun, J. Lee , J.M. Lee and T.O. Tak, A Development of the Modular Experimental Vehicle with Variable Suspension Systems Transaction of Korea Society of Automotive Engineers Vol.5, No.5 1997
Sung Jin Lee, Jintai Chung and Jang Moo Lee, Free Vibration of a Flexible Spinning Disk with Axial Translation and Rigid-Body Tilting, JSME International Journal Series C - Mechanical Systems Machine Elements and Manufacturing Vol. 41, No. 3 329-337 1998
Jang-Moo Lee, Jong-Hyun Kim, Sung-Woo Yoo and Chang-Gi Ahn, A study on the sqeual Noise of Drum Brakes Journal of the Korean Society of Precision Engineering Vol.15, No. 9 1998
Sang-Beom Lee, Hong-Jae Yim and Jang Moo Lee, Optical stiffness of Joint Structures of a Vehicle for Vibration Journal of Acoustical Society of Korea Vol. 17, No. 1 1998
Seok Hyun Kim, Sang Wook Kang and Jang Moo Lee, Analysis on the Vibro-Acoustical Characteristics of a Panel-Cavity Coupled System Journal of Theoretical and Applied Mechanics Vol.4, No.1 1998
Byeong Gi Lee, Doh-Yeon Kim, Tai-Yoo Kim, Jang Moo LEE, Young Je Yoo and Yoo Shin Kim, Pi structured Education System Jouranl of the Korean Society for Engineering Education & Technology Transfer Vol.1, No.1 1998
이영배, 나형용, 이장무, 곽동해, 송광사 서울분원 법련사 불일범종에 관한 연구 한국범종연구회지 No. 18/19 1998
이장무, 김석현, 법대 기념종의 진동 및 음향 특성에 관한 연구 한국범종연구회지 No. 18/19 1998
J.M. Lee, J.S. Kang, T.O.Tak and J.W. Yoon, A Study on the Optimum Design of Compliance Characteristics of Suspension System Transactions of Korea Society of Automotive Engineers Vol.6, No.6 1998
Y.H.Kim, C.I. Park, and J.M. Lee, Analytical Investigation of the shift Characteristics of a Passenger Car Automatic Transmission Transactions of Korea Society of Automotive Engineers Vol.6, No.2 1998
Chul Ki Song, Jin Kwon Hwang, Jang Moo Lee, System Identification of a Plate with Piezoelectric Actuators and Sensors Journal of the Korean Society of Precision Engineering Vol. 15, No. 11 1998
Han Sang Jo, Weon Sik Lim, Yeong Il Park and Jang Moo Lee, A method for Determination of the Effective Stiffness of Transmission System in Rotating Machinery by Using Characteristic Equation Transactions of Korea Society of Automotive Engineers (A) Vol.22, No.12 1998
Jo HS, Lim WS, Park YI, Lee JM :Prediction of the performance of a split/circulated power transmission PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING 213 (D3): 235-244 1999
Jang Moo Lee, The Divine Bell of King Sonagdok Korea Journal of UNESCO( SSCI Journal) Vol.39, No. 4 1999
J. Kim, F. C. Park and J. M. Lee, A New Parallel Mechanism Machine Tool Capable of Five-face Machining Annals of the CIRP Vol. 48, No. 1 337-340 1999
Han Sang Jo, Jang Moo Lee, Yeong Il Park and Won Sik Lim, A Performance Simulation of Vehicle Powertrain for Fuel Economy and Driveability Analysis Transaction of Korea Society of Automotive Engineers Vol.7, No.2 1999
송철기, 황진권, 이장무, 자동차 모델의 능동 구조-음향 제어 자동차학회지 Vol.7, No.2 1999
Jaehyung Lee, Sang-Woo Bae, Hong Hee Yoo and Jang Moo Lee, Vibration of a vehicle Body Due to Road Roughness Transactions of Korea Society of Automotive Engineers Vol.7, No.1 1999
이장무, 김종현, 이상원, 박준형, 초소형 내시경 작동기의 개발과 제어에 관한 연구 한국정밀공학회지 제16권, 제2호 1999
Kang-Ho Ko and Jang-Moo Lee, Booming Noise Reduction of Passenger Cars by Mode Decoupling of Structural-Acoustic Systems Journal of the Korea Society for Noise and Vibration Engineering Vol.9, No.4 1999
박상영, 이상현, 이수일, 이장무, 로터리 컴프레서 방사소음의 실험적 저감 한국소움진동공학회지 제9권, 제1호 1999
Cheol-Hee Kim, Jang Moo Lee and Yeon June Kang, The Sound Field Reconstruction of a Korean Bell Using an Error Minimization Scheme in the BEM-Based Acoustical Holography Journal of the Korean Society for Noise and Vibration Engineering Vol.9, No.1 1999
Han Sang Jo, Sung Tae Cho, Jang Moo Lee and Yeong Il Park, A Development of Parallel Type Hybrid Drivetrain System for Transit Bus Part 2 : A Development of Advanced Shift Control Algorithm For Hybrid Vehicle with Automated Manual Transmission Transaction of Korea Society of Automotive Engineers Vol.7, No.5 1999
Han Sang Jo, Jang Moo Lee and Yeong Il Park, A Development of the Parallel Type Hybrid Drivetrain System for the Transis Bus Part I : Driveability and Sensitivity Analysis Transaction of Korea Society of Automotive Engineers Vol.7, No.4 1999
박진호, 이진원, 조한상, 박영일, 이장무, 변속 알고리즘의 검증을 위한 실시간 시뮬레이션 프로그램과 변속제어기 인터페이스 개발 한국자동차공학회논문집 제7권, 제3호 1999
조한상, 이장무, 박영일, 자동화 변속기를 장착한 버스용 병렬형 하이브리드 동력전달계의 변속 특성 해석과 승차감에 관한 연구 한국자동차공학회논문집 제7권 제7호 1999
조한상, 이장무, 박영일, 버스용 병렬형 하이브리드 동력전달계의 개발(III) 제3편: 최적 주행 제어 알고리듬 한국자동차공학회논문집 제7권, 제6호 1999
조한상, 장욱진, 박진호, 임원식, 박영일, 이장무, 승용차 자동변속기의 변속특성향상에 관한 연구 한국자동차공학회논문집 제7권, 제6호 1999
고강호, 이장무, 구조 가진과 음향 가진의 결합에 의한 차량의 구조-음향 전달 함수 측정 한국자동차공학회논문집 제7권, 제9호 1999
김정윤, 이장무, 여인욱, 무단변속기 장착차량의 발진성능 해석을 위한 시뮬레이션 프로그램 개발 한국자동차공학회논문집 제7권, 제7호 1999
임원식, 조한상, 장욱진, 박영일, 이장무, 서브 시스템 조합 개념을 이용한 동력전달계 동적 특성 해석용 프로그램 개발 대한기계학회논문집 A권 제23권, 제12호 1999
이신영, 이장무, 신경회로망을 이용한 엔드밀 가공의 비절삭력계수 모델링 대한기계학회논문집 A권 제23권, 제6호 1999
Jo HS, Lim WS, Park YI, Lee JM :A study of the shifting transients of a torque converter equipped vehicle HEAVY VEHICLE SYSTEMS-INTERNATIONAL JOURNAL OF VEHICLE DESIGN 7 (4): 264-280 2000
Jo HS, Park YI, Lee JM, Lee HD, Sul SK :A development of an advanced shift control algorithm for a hybrid vehicles with automated manual transmission HEAVY VEHICLE SYSTEMS-INTERNATIONAL JOURNAL OF VEHICLE DESIGN 7 (4): 281-298 2000
Jo HS, Park YI, Lee JM, Jang WJ, Park JH, Lim :A study on the improvement of the shift characteristics for the passenger car automatic transmission INTERNATIONAL JOURNAL OF VEHICLE DESIGN 23 (3-4): 307-328 2000
Lee J, Thompson DJ, Yoo HH, Lee JM :Vibration analysis of a vehicle body and suspension system using a substructure synthesis method INTERNATIONAL JOURNAL OF VEHICLE DESIGN 24 (4): 360-371 2000
Jo HS, Jang WJ, Lim WS, Lee JM, Park YI :Development of a general-purpose program based on the concept of subsystem assembly for the analysis of dynamic characteristics of a power transmission system PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING 214 (D5): 545-560 2000
Kim JH, Lee JM :Elastic foundation effects on the dynamic response of engine mount systems PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING 214 (D1): 45-53 2000
Lee HD, Sul SK, Cho HS, Lee JM :Advanced gear-shifting and clutching strategy for a parallel-hybrid vehicle IEEE INDUSTRY APPLICATIONS MAGAZINE 6 (6): 26-32 2000
Kang SW, Lee JM :Application of free vibration analysis of membranes using the non-dimensional dynamic influence function JOURNAL OF SOUND AND VIBRATION 234 (3): 455-470 2000
박진호, 박영일, 이장무, 경사가 포함된 도로의 주행시 실제 주행연비 예측 한국자동차공학회논문집 제8권, 제3호 2000
이장무, 강주석, 윤중락, 배상우, 탁태오, 기구학적 구속조건과 탄성요소를 가진 현가계의 모드해석 한국자동차학회논문집 제8권, 제1호 2000
조성태, 전순일, 이장무, 박영일, 조한상, 병렬형 하이브리드 동력전달계의 성능 민감도 해석 한국자동차공학회논문집 제8권, 제1호 2000
Min Joong Kim, Jintai Jung and Jang Moo Lee, Development of a Finite Element for Vibration Analysis of an Annular Plate with Slight Deviation 한국소음진동공학회지 제10권, 제2호 2000
이진원, 장욱진, 박진호, 박영일, 이장무, 다중모드 무단 변속기의 구조이론에 관한연구 대한기계학회논문집 A권 제24권, 제10호 2000
조한상, 박진호, 공진형, 이장무, 박영일, 승차감 해석을 위한 동력전달계와 차량계의 모델링 대한기계학회논문집 A권 제24권, 제4호 2000
배상우, 윤중락, 이장무, 탁태오, 차량모델의 복잡성이 차량동력학 해석에 미치는 영향: 모델의 비교 및 검증 한국자동차공학회논문집 제8권, 제6호 2000
Jo HS, Jo ST, Lee JM, Park YI :Analysis of the shift characteristics of an automated manual transmission in the parallel type hybrid drivetrain system of a transit bus HEAVY VEHICLE SYSTEMS-INTERNATIONAL JOURNAL OF VEHICLE DESIGN 8 (1): 60-82 2001
Lee SJ, Hong SK, Lee JM :A study of shock-resistance design of suspension subjected to impulsive excitation IEEE TRANSACTIONS ON MAGNETICS 37 (2): 826-830826-830 Part1 2001
Kang SW, Lee JM :Free vibration analysis of arbitrarily shaped plates with clamped edges using wave-type functions JOURNAL OF SOUND AND VIBRATION 242 (1): 9-26 2001
Lee JM, Yoo SW, Kim JH, Ahn CG :A study on the squeal of a drum brake which has shoes of non-uniform cross-section JOURNAL OF SOUND AND VIBRATION 240 (5): 798-808 2001
Park JH, Kong JH, Jo HS, Park YI, Lee JM :Measurement of road gradients for the development of driving modes including road gradients PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING 215 (D9): 977-986 2001
Cho ST, Jeon S, Jo HS, Lee JM, Park YI :A development of shift control algorithm for improving the shift characteristics of the automated manual transmission in the hybrid drivetrain INTERNATIONAL JOURNAL OF VEHICLE DESIGN 26 (5): 469-495 2001
Choongki Park, Min Gyu Han, Sung Sun Cho, Hyoung Gil Choi, Ji Deok Jeong, and Jang Moo Lee: A Study on the Reduction of Disk Brake Squeal Using Complex Eigenvalue Analysis, SAE 2001 Transaction Journal of Passenger Cars Vol. 110, No. 6 2001
Choonki Park, Min Gyu Han, Sung Sun Cho, Hyoung Gil Choi, Ji Deok Jeong, and Jang Moo Lee, A Study on the Reduction of Disc Brake Squeal Using Complex Eigenvalue Analysis, SAE 2001 Transactions Journal of Passenger Cars Vol. 110, No. 6 2459-2463 2001
이진우, 이장무, 김석현, 박동철, 진동-음향 상반성을 이용한 차실-트렁크 연성계의 소음평가 한국자동차공학회 논문집 Vol.9, No.6 2001
박찬일, 이장무, 리드오차의 영향에 대한 헬리컬 기어 소음의 실험적 연구 대한기계학회논문집 A권 제25권, 제8호 2001
이진우, 김규범, 이장무, 김석현, 박동철, 차실-트렁크 연성계의 연성경로 및 음향모드 특성에 관한 실험적 연구 대한기계학회논문집 A권 제25권, 제8호 2001
Ko YE, Lee JM :Estimation of the stability region of a vehicle in plane motion using a topological approach INTERNATIONAL JOURNAL OF VEHICLE DESIGN 30 (3): 181-192 2002
Bae S, Lee JM, Chu CN :Axiomatic design of automotive suspension systems CIRP ANNALS-MANUFACTURING TECHNOLOGY 51 (1): 115-118 2002
Bae S, Lee JM, Kang YJ, Kang JS, Yun JR :Dynamic analysis of an automatic washing machine with a hydraulic balancer JOURNAL OF SOUND AND VIBRATION 257 (1): 3-18 2002
Shin M, Bae S, Lee JM, Lee J, Heo SJ, Tak TO :New vehicle dynamics model for yaw rate estimation VEHICLE SYSTEM DYNAMICS 37: 96-106 Suppl. S 2002
Jintai Chung, Min Joong Kim and Jang Moo Lee, A Finite Annular Plate Element with Slight Deviation for Vibration Analysis of Nearly Axisymmeric Disk JSME International Journal Series C Vol. 45, No. 3 682-689 2002
김석현, 김정헌, 정지덕, 이장무, 성덕대왕신종의 진동 및 음향 특성 한국소음진동공학회 논문집 Vol. 26, No. 6 2002
이진원, 임원식, 박영일, 이장무, 다구찌 방법을 이용한 토크 컨버터의 차량 연비 및 가속성능에 미치는 영향분석 대한기계학회논문집A Vol.26, No. 6 2002
Kim J, Cho YM, Park FC, Lee JM :Design of a parallel mechanism platform for simulating six degrees-of-freedom general motion including continuous 360-degree spin CIRP ANNALS-MANUFACTURING TECHNOLOGY 52 (1): 347-350 2003
Bae S, Lee JM, Choi WJ, Yun JR, Tak TO :Axiomatic approach to the kinematic design of an automotive suspension system with the McPherson strut type INTERNATIONAL JOURNAL OF VEHICLE DESIGN 31 (1): 58-71 2003
Lee SI, Lee JM, Hong SH: Dynamics and control of tapping tip in atomic force microscope for surface measurement applications CIRP ANNALS-MANUFACTURING TECHNOLOGY Volume: 54 Issue: 1 527-530 2005
Lee JM, Pak CG, Lee HS, et al.: Vibration analysis of an idealized vertical pump model PROCEEDINGS OF THE INSTITUTION OFMECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE Volume: 219 Issue: 2 169-181 2005
Park S, Bae S, Lee JM :Numerical evaluation of braking feel to design optimal brake-by-wire system INTERNATIONAL JOURNAL OF VEHICLE DESIGN Volume: 37 Issue: 1 1-23 2005
Cho YH, Lee JM, Park SY, et al.;Robust measurement of damping ratios of a railway contact wire using wavelet transforms ADVANCED NONDESTRUCTIVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS Book Series: KEY ENGINEERING MATERIALS Volume: 321-322 2006
Park SY, Jeon BU, Lee JM, et al.:Measurement of low-frequency wave propagation in a railway contact wire with dispersive characteristics using wavelet transform ADVANCED NONDESTRUCTIVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS Book Series: KEY ENGINEERING MATERIALS Volume: 321-323 Pages: 1609-1615 2006
Lee SI, Hong SH, Lee JM :Nanoscale surface property estimation using proper orthogonal decomposition in atomic force microscopy CIRP ANNALS-MANUFACTURING TECHNOLOGY Volume: 57 Issue: 1 563-566 2008
Kang SW, Lee JM : Comments on JOURNAL OF SOUND AND VIBRATION 252 (1): 189-189 APR 18 2002
Chang SI, Lee JM, Bajaj AK, Krousgrill CM :Subharmonic responses in harmonically excited rectangular plates with one-to-one internal resonance :CHAOS SOLITONS & FRACTALS 8 (4): 479-498 APR 1997
Lee C, Ahn K, Lee JM, Lim WS :Slip control strategy for an automatic transmission vehicle KSME INTERNATIONAL JOURNAL 17 (4): 521-527 APR 2003
Kong JH, Park JH, Lim WS, Lee JM et al. :Effects of the vehicle model on shifting transients of passenger cars with automatic transmission INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY Volume: 7 Issue: 2 155-160 APR 2006
Kang SW, Lee JM :Free vibration analysis of an unsymmetric trapezoidal JOURNAL OF SOUND AND VIBRATION 272 (1-2): 450-460 APR 22 2004
Kang SW, Lee JM :Comments on JOURNAL OF SOUND AND VIBRATION 262 (2): 379-379 APR 24 2003
Lee JW, Lee JM :An improved mode superposition method applicable to a coupled structural-acoustic system with a multiple cavity JOURNAL OF SOUND AND VIBRATION Volume: 301 Issue: 3-5 821-845 APR 3 2007
Kang SW, Lee JM :Comments on JOURNAL OF SOUND AND VIBRATION 271 (3-5): 1158-1162 APR 6 2004
Y. I. Park and J. M. Lee, Analysis on Shifting Transients of Automotive Transmission Journal of Korean Society of Automotive Engineers Vol. 14, No. 2 44-53 Apr. 1992
Kang SW, Kim IS, Lee :Free vibration analysis of arbitrarily shaped plates with smoothly varying free edges using NDIF method JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME Volume: 130 Issue: 4 Article Number: 041010 AUG 2008
Kang SW, Lee JM :Comments on JOURNAL OF SOUND AND VIBRATION 235 (1): 170-171 AUG 3 2000
S. W. Kim, and J. M. Lee, Optimum Reduction Gear Ratio for a Rapid Transit Car in Seoul Transactions of the Korean Society of Mechanical Engineers Vol. 3, No. 3 124-131 Aug. 1979
J. B. Ssengonzi, J. M. Lee and Y. H. Yum, A Study on the Predication of the Limiting Depth of Cut in Dynamic Cutting of Tapered Workpiece Transactions of the Korean Society of Mechanical Engineers Vol. 6, No. 3 271-281 Aug. 1982
CHUNG JT, LEE JM :A NEW FAMILY OF EXPLICIT TIME INTEGRATION METHODS FOR LINEAR AND NONLINEAR STRUCTURAL DYNAMICS INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 37 (23): 3961-3976 DEC 15 1994
Lee SY, Ko KH :Analysis of dynamic characteristics of structural joints using stiffness influence coefficients KSME INTERNATIONAL JOURNAL 14 (12): 1319-1327 DEC 2000
Ahn CG, Choi HG, Lee JM :Structural-acoustic coupling analysis of two cavities connected by boundary structures and small holes JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME Volume: 127 Issue: 6 566-574 DEC 2005
Ahn K, Cho S, Cha SW, Lee JM et al.:Engine operation for the planetary gear hybrid powertrain PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING Volume: 220 Issue: D12 1727-1735 DEC 2006
K. J. Kim and J. M. Lee, A Study on the Vibration of Cutting System by Time Series Analysis Technique Journal of the Korean Society for Aeronautical and Space Sciences Vol. 6, No. 2 29-35 Dec. 1978
Jang Moo Lee, An Experimental Study on Cutting Mechanics and Dynamics in Turning Journal of the Korean Society for Aeronautical and Space Sciences Vol. 8, No. 2 42-48 Dec. 1980
J. M. Lee, and Y. H. Yum, A Study on the Vibrational Characteristics of Bell Shape Structure Journal of the Society for Korean Bell Vol. 3 31-38 Dec. 1980
S. Y. Lee and J. M. Lee, Dynamic Design of an NC Lathe by Using Substructure Synthesis Method Journal of the Korean Society of Precision Engineering Vol, 6, No. 4 126-135 Dec. 1989
Park HG, Lee JM, Kang YJ, et al:A study on the mode pair of a slightly asymmetric circular ring with multiple deviations JOURNAL OF SOUND AND VIBRATION Volume: 310 Issue: 1-2 366-380 FEB 5 2008
Lee JW, Lee JM :Forced vibro-acoustical analysis for a theoretical model of a passenger compartment with a trunk - Part I: Theoretical part JOURNAL OF SOUND AND VIBRATION Volume: 299 Issue: 4-5 900-917 FEB 6 2007
Lee JW, Lee JM :Forced vibro-acoustical analysis for a theoretical model of a passenger compartment with a trunk - Part II: Experimental part JOURNAL OF SOUND AND VIBRATION Volume: 299 Issue: 4-5 918-932 FEB 6 2007
Y. H. Yum, Y. K. Shin, S. W. Cho, J. M., Lee, and K. I, Lee, A Study on the Structural Strength of Subway Electric Car Journal of the Korean Society of Mechanical Engineers Vol. 22, No. 1 53-61 Feb. 1982
S. S. Rhim, J. M. Lee, Y. H. Choi, H. K. Min, J. H. Lee, Parametric Analysis of the Properties of a Passenger Car for the Improved Ride Quality Journal of Korea Society of Automotive Engineers Vol. 15, No. 1 73-80 Feb. 1993
Kim SH, Lee JM :A practical method for noise reduction in a vehicle passenger compartment JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME 120(1) JAN 1998
Kang SW, Lee JM :Sound absorption characteristics of air-gap systems in enclosed cavities JOURNAL OF SOUND AND VIBRATION 259 (1): 209-218 JAN 2 2003
Chung J, Lee JM :Vibration analysis of a nearly axisymmetric shell structure using a new finite ring element JOURNAL OF SOUND AND VIBRATION 219 (1): 35-50 JAN 7 1999
J. M. Lee, S. Y. Lee, and H. Lee, Vibration and Chatter Analysis of an NC Lathe International Journal of Analytical and Experimental Modal Analysis Vol. 4, No. 1 19-24 Jan. 1989
S. H. Kim, J. M. Lee and J. H. Kim, A Study on the Acoustical and Vibrational Characteristics of a Passenger Car(III) Transactions of the Korean Society for Mechanical Engineers Vol. 16, No. 1 13-21 Jan. 1992
Yoon YJ, Lee JM, Yoo SW, Choi HG :A new method for in-plane vibration analysis of circular rings with widely distributed deviation JOURNAL OF SOUND AND VIBRATION 254 (4): 787-800 JUL 18 2002
Hwang JK, Choi CH, Song CK, Lee JM :Identification of a thin plate with piezoelectric actuators and sensors JOURNAL OF VIBRATION AND ACOUSTICS -TRANSACTIONS OF THE ASME 120 (3): 826-828 JUL 1998
Kang SW, Lee JM, Kim SH :Structural-acoustic coupling analysis of the vehicle passenger compartment with the roof, air-gap, and trim boundary JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME 122 (3): 196-202 JUL 2000
Lin CC, Jeon S, Peng H, Lee JM et al.:VEHICLE SYSTEM DYNAMICS Volume: 42 Issue: 1-2 41-58 JUL-AUG 2004
Jang Moo Lee and Kenneth G. McConnell, Random Load Simulation in Laboratory Fatigue Testing Transactions of Society of Automotive Engineers Vol. 87 326-336 Jul. 1979
KIM SH, SOEDEL W, LEE JM :ANALYSIS OF THE BEATING RESPONSE OF BELL TYPE STRUCTURES JOURNAL OF SOUND AND VIBRATION 173 (4): 517-536 JUN 16 1994
HONG JS, LEE JM :VIBRATION OF CIRCULAR RINGS WITH LOCAL DEVIATION JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME 61 (2): 317-322 JUN 1994
Chung JT, Kang NC, Lee JM :A study on free vibration of a spinning disk KSME JOURNAL 10 (2): 138-145 JUN 1996
Youn JO, Lee JM, Kim YY :On the free vibration analysis of a plate with an oblique inelastic line constraint KSME INTERNATIONAL JOURNAL 12 (3): 358-369 JUN 1998
Lee SY, Lee JM :Specific cutting force coefficients modeling of end milling by neural network KSME INTERNATIONAL JOURNAL 14 (6): 622-632 JUN 2000
Kim SK, Lee JM :Analysis of the non-linear vibration characteristics of a belt-driven system AL OF SOUND AND VIBRATION 223 (5): 723-740 JUN 24 1999
Lee JW, Lee JM, Kim SH ;Acoustical analysis of multiple cavities connected by necks in series with a consideration of evanescent waves JOURNAL OF SOUND AND VIBRATION 273 (3): 515-542 JUN 7 2004
H. Lee and J. M. Lee, Vibration Analysis of Vertical Axial Pump Model Journal of the Korean Society for Aeronautical and Space Sciences Vol. 9, No. 1 38-46 Jun. 1981
J. M. Lee, D. C. Han, and J. B. Chae, A Study on the Performance Improvement of a Compressor Report of the Research Institute of Industrial Science Vol. 9, No. 1 Jun. 1986
S. Y. Lee and J. M. Lee, A Study on the Dynamic Modelling of Bearing Joints in Machine Tools Journal of Korean Society of Precision Engineering Vol. 9, No. 2 61-68 Jun. 1992
Jang Moo Lee, Theory and Practices of Machine Tool Performance Improvement Journal of the Korean Society of Mechanical Engineers Vol. 20, No. 3 176-183 June 1980
Kang SW, Lee JM, Kang YJ :Vibration analysis of arbitrarily shaped membranes using non-dimensional dynamic influencefunction JOURNAL OF SOUND AND VIBRATION 221 (1): 117-132 MAR 18 1999
Kang SW, Lee JM :Eigenmode analysis of arbitrarily shaped two-dimensional cavities by the method of point-matching JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 107 (3): 1153-1160 MAR 2000
Jeon SI, Jo ST, Park YI, Lee JM :Multi-mode driving control of a parallel hybrid electric vehicle using driving pattern recognition JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME 124 (1): 141-149 MAR 2002
Kang JS, Bae S, Lee JM, Tak TO :Force equilibrium approach for linearization of constrained mechanical system dynamics JOURNAL OF MECHANICAL DESIGN 125 (1): MAR 2003
Kang SW, Lee JM :: Free vibration analysis of composite rectangular membranes with an oblique interface JOURNAL OF SOUND AND VIBRATION 251 (3): 505-517 MAR 28 2002
Kim SH, Lee CW, Lee JM :Beat characteristics and beat maps of the King Seong-dook Divine Bell JOURNAL OF SOUND AND VIBRATION Volume: 281 Issue: 1-2 21-44 MAR 7 2005
J. M. Lee, Generation of Broad-band Stationary Gaussian Signals Seoul National University Engineering Report Vol. 10, No. 1 49-54 Mar. 1978
J. M. Lee, D. W. Cho and J. K. Suh, A Study on the Stability of Cutting System in Turning Operations Transaction of the Korean Society of Mechanical Engineers Vol. 6, No. 1 56-65 Mar. 1982
Jang Moo Lee, Jae Woon Lee and Myung Ho Sung, A Study on Dynamic Modelling of Joints in Plate Structure Journal of Korean Society for Noise and Vibration Engineering Vol. 2, No. 1 61-66 Mar. 1992
J. M. Lee, A Quasi-stationary Random Simulation of Three Standard SAE Spectra; Part. I. Transactions of the Korean Society of Mechanical Engineers Vol. 1, No. 2 104-112 May 1977
Jang Moo Lee, A Study on Machine Tool Structural Dynamics by Digital Correlation Method Transactions of the Korean Society of Mechanical Engineers Vol. 5, No, 2 139-150 May 1981
Lee SY, Kim JW, Lee JM, Kim GB :Chatter analysis of a parallel mechanism-based universal machining center KSME INTERNATIONAL JOURNAL 17 (5): 691-697 MAY 2003
Park CI, Lee JM :Experimental investigation of the effect of lead errors on helical gear and bearing vibration transmission characteristics KSME INTERNATIONAL JOURNAL 16 (11): 1395-1403 NOV 2002
Ahn K, Lee JM, Lim W, et al:Analysis of a clutch damper using a discrete model KSME INTERNATIONAL JOURNAL 18 (11): 1883-1890 NOV 2004
Ahn K, Cho S, Lim W, et al.:Performance analysis and parametric design of the dual-mode planetary gear hybrid powertrain PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING Volume: 220 Issue: D11 1601-1614 NOV 2006
J. M. Lee, Statistical Measurements of Simulated Random Signals Journal of the Korean Society for Aeronautical and Space Sciences Vol. 5, No. 2 15-22 Nov. 1977
Lee J, Yoo HH, Lee JM ,High frequency characteristics of a front wheel VEHICLE SYSTEM DYNAMICS 28 (4-5): 261-271 OCT 1997
Choi HG, Yoo SW, Jeong JD, Lee JM :Acoustic characteristics of annular cavities with locally non-uniform JOURNAL OF SOUND AND VIBRATION 266 (5): 967-980 OCT 2 2003
Cho ST, Ahn K, Lee JM :Efficiency of the planetary gear hybrid powertrain PROCEEDINGS OF THEINSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING Volume: 220 Issue: D10 1445-1454 OCT 2006
Song CK, Hwang JK, Lee JM, Hedrick JK :Active vibration control for structural-acoustic coupling system of a 3-D vehicle cabin model JOURNAL OF SOUND AND VIBRATION 267 (4): 851-865 OCT 30 2003
Lee JM, Kim SH, Lee SJ, Jeong JD, Choi HG :A study on the vibration characteristics of a large size Korean bell JOURNAL OF SOUND AND VIBRATION 257 (4): 779-790 OCT 31 2002
J. M. Lee, Y. H. Yum, J. K. Suh and M. C. Kim, A Study on the Cutting Mechanics of Heavy Duty Turning Seoul National University Engineering Report Vol. 11, No. 2 39-47 Oct. 1979
R. Lee, Y. H. Yum, J. M. Lee, B. B, Yoon, and J. K. Kwack, A Study on the Vibration and Stress Analysis of Cylindrical Shells Seoul National University Engineering Report Vol. 12, No. 2 31-39 Oct. 1980
B. Yoo, Y. H. Yum, J. M. Lee and S. J. Heo, A Study on the Dynamic Characteristics of a Vertical Milling Machine Model Seoul National University Engineering Report Vol. 13, No. 2 31-39 Oct. 1981
Hwang JK, Choi CH, Song CK, Lee JM :Robust LQG control of an all-clamped thin plate with piezoelectric actuators/sensors IEEE-ASME TRANSACTIONS ON MECHATRONICS 2 (3): 205-212 SEP 1997
Kim SH, Lee JM, Sung MH :Structural-acoustic modal coupling analysis and application to noise reduction in a vehicle passenger compartment JOURNAL OF SOUND AND VIBRATION 225 (5): 989-999 SEP 2 1999
Chung J, Kim MJ, Lee JM :A finite annular plate element with slight deviation forvibration analysis of a nearly axisymmetric disk JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING 45 (3): 682-689 SEP 2002
Kang SW, Lee JM: Noise reduction of an enclosed cavity by means of air-gap systems INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY 5 (3): SEP 2004
J. M. Lee and K. G. McConnell, Experimental Cross Verification of Damping in Three Metals Experimental Mechanics Vol. 15, No. 9 347-353 Sep. 1975
목록보기